Table of Contents
Advertisement
RJ45 LAN Ports
LAN 2
Features
•
2 Intel
I210IT PCI Express Gigabit Ethernet controllers
®
The LAN ports enable the system board to connect to a local area network.
BIOS Setting
Configure the onboard LAN in the "ACPI Configuration" submenu of the Advanced menu in the
BIOS. Refer to Chapter 7 for more information.
Driver Installation
Install LAN drivers. Refer to Chapter 8 for more information.
Chapter 5 Ports and Connectors
Chapter 5
12V DC-in
LAN 1
This 2-pin terminal block on the power board is considered a low power solution. It is an ex-
ternal DC-in connector that accepts DC power and supplies power to the main board. Please
note that using a voltage more than the recommended range may fail to boot the system or
cause damage to the system board.
The reset button allows you to reboot the system without powering off the system first.
15
+
Advertisement
Table of Contents
