Table of Contents
Advertisement
11. Insert the drive bay bracket from the side of the system
12. Secure the drive bay bracket by fastening the screws you removed earlier.
13. Replace the chassis cover and secure it with the screw you removed earlier.
Chapter 3 Installing Devices
Chapter 3
14. Insert the provided power cord holder. This will prevent the cord from falling off easily or
detaching from the system.
Power cord holder
15. When you power up the system, configure the drives in the BIOS. Refer to the system board
manual in the provided DVD.
16. Refer to the manual or documentation enclosed with the drives for additional information on
using the drive.
15
Insert holder here
www.dfi.com
Advertisement
Table of Contents
