Table of Contents
Advertisement
System Agent (SA) Configuration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset
System Agent Bridge Name
IvyBridge
Graphics Configuration
NB PCIe Configuration
Memory Configuration
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Graphics Configuration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset
Graphics Configuration
IGFx VBIOS Version
2132
IGfx Frequency
350 MHz
Primary Display
[Auto]
DVMT Total Gfx Mem
[256M]
LCD Control
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Primary Display
Auto
When the system boots, it will auto detects the display device.
IGFX
When the system boots, it will first initialize the onboard VGA.
PEG
When the system boots, it will first initialize the PCI Express x16 graphics
card.
DVMT Total Gfx Mem
This field is used to select the graphics memory size used by DVMT mode.
Chapter 7 BIOS Setup
Chapter 7
Config Graphics Settings.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
ESC: Exit
Select which of IGFX/
PEG/PCI Graphics device
should be primary delay
or select SG for switch-
able Gfx.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
ESC: Exit
47
LCD Control
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset
LCD Control
Primary IGFX Boot Display
[VBIOS Default]
LCD Panel Type
[Type 2-800x600]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Primary IGFX Boot Display and Secondary IGFX Boot Display
The options are VBIOS Default, CRT, HDMI, LVDS, DVI-I and DVI-D.
LCD Panel Type
This field is used to select the type of LCD panel used by the internal graph-
ics device.
NB PCIe Configuration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset
NB PCIe Configuration
PEG0
Not Present
PEG0 – Gen X
[Auto]
[Enabled]
Enable PEG
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Enabled PEG
To enable or disable the PEG.
Select the Video Device
which will be activated
during POST. This has no
effect if external graphics
present.
Secondary boot display
selection will appear based
on your selection.
VGA modes will be sup-
ported only on primary
display.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
ESC: Exit
Configure PEG0
B0:D1:F0 Gen1-Gen3.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
ESC: Exit
www.dfi.com
Advertisement
Table of Contents
