Chapter 6 - Mounting Options; Wall Mount - DFI ST101-CR User Manual

Chapter 6 - Mounting Options

Wall Mount

The wall mount kit includes the following:
• 2 Wall mount brackets
• Bracket screws
1. If the rubber feet has been previously attached at the
them first.
2. The mounting holes are located at the bottom of the system. Mount the wall mount brackets
on each side of the system using the mounting screws.
Wall mount bracket
Chapter 6 Mounting Options
Chapter 6
bottom of the system, please remove
Wall mount bracket
33
3. Mount the whole system on the wall by fastening the screws through the mounting holes.
Note:
The pictures in this document are for illustration only. The system board and all
other components may differ depending on the configuration you have purchased.
Please refer to the provided DVD for details relevant to the system board.
Mounting hole
www.dfi.com