Dolby Noise Reduction (Models Vr 200 And Vr 400); Tape Player Care; Cassette Tape Care; Cassette Clean Indicator - Volvo FM Driver's Handbook Manual

26 Using the Cassette Player
Dolby Noise Reduction
(Models VR 200 and VR 400)
Enabling the Dolby B-type noise reduc-
tion function during cassette playback
will reduce background noise on tapes
that were recorded with this technology.
To turn on or turn off Dolby B-type
noise reduction, press the button with the
double-D logo
will display while the noise reduction is
on.
Manufactured under a license from
Dolby Laboratories. Dolby and the dou-
ble-D symbol are trademarks of
Dolby Laboratories.

Tape Player Care

The tape player must be cleaned after
every 35 hours of use.
Caution: Not cleaning the tape
player can cause reduced sound
quality and may ruin your cas-
settes or damage the player.
Clean the player with a scrubbing-
action, non-abrasive cleaning cassette.
These cassettes have a bottle of cleaning
liquid that is applied to cleaning pads
and scrubs the tape heads. To properly
clean your tape player, follow the
instructions with the cleaning cassette.
Cleaning cassettes should be replaced
regularly.
Note: The cleaning cassette is not
included with your radio and must be
purchased separately.
. The double-D icon
Never touch the cassette head with mag-
netic or hard objects.
Do not lubricate the player mechanism.
Do not use cassettes that are longer than
90 minutes (C-90). Longer cassettes,
like C-120, tend to have thinner tape that
may stretch or break and may damage
your player.

Cassette Tape Care

Do not use cassettes that are deformed,
dirty or contaminated.
Cassette tapes that are not properly
stored in their plastic cases away from
contaminants, direct sunlight and
extreme heat may not operate properly
and may damage your tape player.
Cassette tapes are subject to wear and
the sound quality may degrade over
time. Always verify the cassette tape is
in good condition before use.

Cassette Clean Indicator

The tape player will alert you that it
should be cleaned by displaying the
message "TP CLEAN". After the player
is cleaned,
Press AUD for 5 seconds to
clear display.
CLN RST will display for
Then the display returns to the default.
2:186
3 seconds.