Comment on 1 driver operation
In the 1 driver operation, only the chart for
driver 1 is to be inserted on the separating
plate.
7. Make sure that the position of the chart
carrier is temporally correct. The time
scale of the chart has to be adjusted to
the current time of the display at the
respective marker (d).
d
½
If this is not the case, please start the
chart carrier settings update,
➥
see page 15.
8. Bring the hinged drawer into a horizontal
position and push it in until it latches.
komp-gbr
Enable the device
9. The basic display is shown:
½
including date, time, and the total
number of kilometres,
½
additionally, the symbols for the in-
serted charts, and current position of
the time groups, on the left for driver 1
and on the right for driver 2, are dis-
played.
Notes on the basic display
•
The time of the tachograph 1324 is adju-
sted to the legal time of the country
where the vehicle has been registered.
The start and the end of the daylight
saving time are deposited within the
device and will be updated automati-
cally.
➥
See also page 14 "Error code
overview".
•
In case an exclamation mark appears
next to the total kilometre reading, there
has been a failure.
"Error code overview".
1:311
7
➥
See also page 14