Speed-Dependent Volume (Model Vr 400 Only) - Volvo FM Driver's Handbook Manual

10 Audio Controls
To change the degree of effect for the
selected simulation
Press AUD to scroll
RSIM # to change the
degree of effect.
OR
Turn SELECT to
increase or decrease
from 0 (minimum) to 15 (maximum).
After 5 seconds, the setting is saved and
the display returns to default as indicated
on the display.
Speed-Dependent Volume
(Model VR 400 only)
The Model VR 400 can automatically
adjust the volume based on your vehi-
cle's speed, turning the volume up as
you travel faster and down as you travel
slower. This adjustment helps the radio
to be heard over vehicle and road noise.
Turn VOLUME to
increase or decrease
effect.
effect.
To turn on Speed-Dependent Volume,
Press and hold to
display 12/24.
Turn to display SCV.
Press to choose
amount of volume.
change to "N" (off), "1" (low setting),
"2" (medium setting) or "3" (high set-
ting).
Note: The volume change is heard only
while the vehicle is moving, but may not
be noticeable due to the changes in road
noise.
2:170