6
Enable the device
Inserting the driver 2 chart
Before starting to drive, the centre
field of the chart has to be duly
➥
recorded,
see page 18.
4. The driver 2 inserts the recorded chart
with the front side facing up in the "pear-
shaped" chart carrier.
Make sure that the chart is located be-
low the spring element (a).
a
Inserting the driver 1 chart
6. The driver 1 inserts the recorded chart
on the separating plate in the chart car-
rier with the front side facing up.
Make sure that the tachograph chart is
located under the holding-down
device (b) and the latches (c) of the
pear-shaped chart carrier.
5. Tilt separating plate downwards.
c
1:310
b