Volvo FM Driver's Handbook Manual page 757

Menu
5 Settings
51 Factory settings
52 Operator
53 Language
54 SIM security
55 Change codes
551 PIN code
552 Telephone code
56 Sound
561 Ring volume
562 Ring signal
563 Button click
564 Speed-dependent
volume
565 Radio auto-mute
57 Dynafleet status
komp-gbr
Comments
Resets the telephone to the factory settings (affects lan-
guage, operator, ring volume, ring signal, button click,
speed-dependent volume, radio auto-mute, Dynafleet)
Select whether the telephone should search for another op-
erator when the correct one is not found or whether to
select the operator manually.
Select Language
With SIM security "On" the PIN code must be entered ev-
ery time the telephone is switched on. With SIM security
"Off" the PIN code never needs to be entered when the
telephone is switched on. With SIM security on "Auto"
the PIN code only needs to be entered when the telephone
is switched on if the SIM card is replaced.
You will be provided with a PIN code together with your
SIM card. You can change the PIN code here. The PIN
code must be 4-8 digits.
The telephone code is 1234 when the vehicle is delivered.
You can change the telephone code here.
Select the desired volume ring signal Change the volume
using << and >>. Go back to the menu "Sound" using NO.
Select the ring signal.
Select whether the buttons sound when pressed.
If Speed-dependent volume is on, then the volume will in-
crease as the vehicle speed increases.
If Radio auto-mute is on, the radio volume will be low-
ered when the telephone rings.
Set if Dynafleet is connected or not. If Dynafleet status is
set as connected all messages are managed via Dynafleet.
Telephone menu 2 is not available.
2:231
Menus 17