Opening the drawer
The drawer may only be opened,
if ...
•
the vehicle is at a standstill and
•
the ignition is switched on.
1. Press the
key.
½
In the display, the "Ejection active"
symbol is shown. Additionally, a
process indicator shows that this proc-
ess may take some time.
½
Wait until the drawer has been
unlocked.
komp-gbr
Enable the device
2. Pull out the hinged drawer to the limit
stop and tip it down.
Remove driver 1 chart if necessary.
3. Tilt separating plate entirely upwards.
Remove driver 2 chart if necessary.
1:309
5