14
Messages
Error code Overview
Displayed message
(Time is flashing)
(Time is flashing)
(Colon is not flashing)
Code
Meaning / measure
9 0 0 A
= Error during CAN transmission
9 0 0 B
Contact Volvo workshop.
9 0 0 F
= Keypad error, key pressed too long or blocked
9 0 1 0
= LCD error (display)
9 0 5 1
=
Driver 1 chart is missing
9 0 5 2
=
Driver 2 chart is missing
(This message will appear when switching from
to
, for example, while the chart is missing.)
Insert chart(s).
9 0 5 3
=
•
The tachograph 1324 has automatically changed
over to the beginning or the end of the daylight
saving time,
•
or the time has been adjusted with the chart
inserted.
Note: update the chart carrier settings,
➥
see page 15.
9 0 6 0
= Error at the drawer
Start the ejection procedure and close the drawer
again afterwards.
9 0 6 1
= Error in recording system
9 0 6 2
(The tachograph 1324 will record these errors on the
9 0 6 3
➥
chart,
9 0 6 4
= Error during chart carrier settings update
Update the chart carrier settings once again,
➥
see page 15.
9 0 6 4
= Error in the driving mechanism of the chart carrier
Check whether the charts have been correctly
inserted.
see page 20.)
1:318