2
Numeric language, general
Stop message
Red stop lamp + stop symbol
If the red stop lamp and stop symbol are
shown in the display the vehicle must be
stopped immediately and the engine must
be switched off. The accompanying nu-
meric text should be read off to establish
where the fault lies. For information about
what the numerical text means, see
"Menus" page 5 – 17 or "Numerical con-
version table" page 18 – 25.
WARNING
The vehicle must be stopped immedi-
ately and the engine must be turned off
when this lamp lights up.
If the engine is running a warning signal
also sounds. It can be acknowledged by
pressing Esc, but starts again after 10 sec-
onds. For more in depth information about
the messages see "Operating instructions
Display, graphic".
Information lamp CHECK + text
When the information lamp CHECK is lit
the fault should be checked at the next
stop. The relevant numerical text is shown
in the display. Several symbols also have a
value displayed. For information about
what the numerical text means, see
"Menus" page 5 – 17 or "Numerical con-
version table" page 18 – 25.
T3014364
T3013624
T3014365
1:250