2
Lift up the wheel
First check that the tensioning band
•
is mounted
•
is complete, including the seam
•
has a knot in the roll
•
is properly coiled on the roll
Tighten the band if necessary.
If the vehicle has a side underrun guard or
chassis fairing, use the inner hole (A) on
the holder.
Lay the wheel straight under the holder. Do
not pull it in with the winch.
Tighten all four nuts by 400 Nm.
A crank for lifting up the wheel, and sleeve
for tightening the nuts are in the vehicle's
tool equipment.
3:146
T0010181
T0010183