Traffic Program (Tp) - Volvo FM Driver's Handbook Manual

Hide thumbs Also See for FM:
Table of Contents

Advertisement

14 Tuning the Radio
button for 5 seconds while in FM mode.
The radio also will automatically start an
FM Memory search any time you Seek a
TP station when AF is off, or Seek a TP
station when the radio is not tuned to an
RDS station.
Note: You can't start an FM Memory
search while the radio is receiving a TP
broadcast.
The radio displays "MEMORY" and the
audio mutes as it seeks for and stores
FM station information.
Note: If TP is turned on when you start
the FM Memory function, the radio dis-
play will indicate "SEARCH" instead of
"MEMORY".
The FM memory process typically takes
less than 30 seconds, but can take up to
several minutes, depending on the num-
ber and type of stations available. You
can cancel the FM memory search by
turning AF off or pressing and holding
the AUTO button.
To keep the stored FM Memory infor-
mation current, you should occasionally
repeat the FM Memory search to update
the information about local frequencies.
FM Memory information remains stored
until another FM Memory store function
occurs.

Traffic Program (TP)

When the Traffic Program feature is
turned on and a traffic announcement is
received, the radio will automatically
interrupt the current mode to broadcast
traffic condition announcements that are
provided by some stations or networks.
Press to turn on.
[TP] icon will display.
Press again to
Note: TP cannot be turned on in AM,
WX or LW mode.
If TP is turned on and the radio is not
tuned to a station broadcasting traffic
announcements, it will begin to SEEK a
station that broadcasts announcements.
The radio will display "SEARCH".
During a Traffic Announcement, the
radio display shows "TRAFFIC".
There are 3 TP icons that may be dis-
played:
TP – Current station can broadcast
traffic announcements, the function
is not enabled.
[ TP ] Flashing – Current station
can broadcast traffic announce-
ments, the function is enabled.
[
] – The function is enabled, but
there are no stations/networks being
received that broadcast traffic infor-
mation. This can also occur if the
TP function is enabled but the radio
travels out of the broadcast area for
the station/network that was broad-
casting the traffic information.
2:174
turn off.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fh

Table of Contents