34 Infrared Remote
Infrared Remote
(Accessory)
The infrared remote can be used to con-
trol all models except Model VR 100.
Power On/Off
Press the POWER button
receiver on or off. The vehicle must be
turned on.
Volume
Press the "+" button to raise the volume
or press the "–" button to lower the vol-
ume. "VOL" is displayed with the num-
ber that represents the volume level.
Mute
Press the MUTE button
mode. "MUTE" is displayed. To cancel
the mute, press the MUTE button again.
While muted, CDs and cassettes contin-
ue to advance.
Radio Select
Press the MODE button to change from
a playback mode (cassette, CD, CD
changer) to the radio mode. The radio
plays the last selected band and station.
To choose a different band, press the
MODE button until the desired band is
displayed.
Radio Tune
Press and hold the top or bottom of the
SEEK button to slowly move through
the frequencies on the current band.
Continue to hold the SEEK button to
activate a fast tune. Release the button to
stop the tune.
to turn the
Radio Seek
to mute any
Press the top or bottom of the SEEK but-
ton to seek the next station. The audio
mutes as the radio searches for and stops
on the next station with a strong signal.
After finding a station, the audio returns
to the original volume.
Note: Seek will cancel if no signal is
strong enough for the radio to recognize
it.
Radio Presets
To listen to the preset stations, choose
the desired band by pressing the MODE
button. Then repeatedly press the P.SET
button until the desired preset number is
displayed.
2:194
Infrared Remote