2
Switch on the refrigerator
Hold the switch marked "ON/OFF" (1) in
for approximately 1 second. The green
LED (2) comes on and the compressor
starts. The compressor only starts if the
battery voltage exceeds 24.2 Volts. If the
battery voltage is lower the green LED (2)
will start to flash. For further information
see "Voltage switch" page 3.
Adjust the temperature by holding the tem-
T0010488
perature selector marked "TEMP" (3). The
blue LEDs (4) come on one by one and
start from the beginning as long as the tem-
perature selector is held depressed. Select
the temperature by releasing the tempera-
ture switch when the correct number of
LEDs are lit. The more blue diodes that are
lit, the lower the temperature in the refrig-
erator. Normal position is five lit blue
LEDs which give approximately +6
C in
the cold storage area at normal ambient
temperatures.
Switch off the refrigerator
Hold the switch marked "ON/OFF" in for
approximately 1 second. The green LED
goes out and the compressor stops. The re-
frigerator must be carefully cleaned if it is
not to be used for some time. See
"Cleaning" page 3. After cleaning the door
must be left wide open for at least 24 hours
so that all the moisture dries out and no
bad odours occur.
2:246