Using The Cassette Player; Cassette Select; Cassette Tightening And Error Detection (Except Model Vr100); Change Cassette Side - Volvo FM Driver's Handbook Manual

Using the Cassette
Player

Cassette Select

Model VR 100

Insert a cassette into the radio and it will
automatically begin to play. "TAPE_A"
or "TAPE_B" is displayed, depending on
which side of the tape is playing.

Model VR 200 and VR 400

With a cassette inserted, press the
MODE button until "CASS" is dis-
played. "TAPE_A" or "TAPE_B" is dis-
played, depending on which side of the
tape is playing. If no cassette is loaded
when pressing the MODE button, the
radio will display "NO TAPE" and
return to FM mode.
Cassette Tightening and
Error Detection
(Except Model VR100)
Each time a cassette is inserted into the
radio, the player automatically checks
for a loosely wound tape and tightens it
before playing. The player also detects
tapes that are too tightly wound or bro-
ken. If a tightly wound or bad tape is
detected, "BAD TAPE" is displayed and
the tape is ejected.
The Cassette Tightening and Error
Detection feature may prevent cleaning
cassettes from working properly. To use
cleaning cassettes, you can override the
error detection.
komp-gbr

Using the Cassette Player 23

If a cleaning tape is rejected,
press and hold TUNE for 5 seconds
(while the radio is OFF and the ignition is ON)
until BAD TAPE and DETECT OFF display.
Then insert cleaning tape.
After "BAD TAPE" and "DETECT
OFF" are displayed, insert the cleaning
tape.
To turn CASSETTE TIGHTENING and
ERROR DETECTION back on,
press and hold TUNE until
BAD TAPE DETECTION is displayed.

Change Cassette Side

Model VR 100
To play the opposite side of a playing
cassette, press the RW and FF buttons at
the same time.
Model VR 200 and VR 400
To play the opposite side of a playing
cassette,
Model 100
Press and hold RW
and FF buttons at
the same time.
Note: For all models, the cassette is
automatically reversed when it reaches
the end of a side.
2:183
Models 200 & 400
Press SELECT.