•
The function TIME ADJUSTMENT
may only be selected if the vehicle is
stationary.
•
For an automatic synchronisation of the
chart carrier and the time, the ignition
has to be switched on and there must
not be any chart inserted in the
tachograph 1324.
1. Select the TIME ADJUSTMENT via
2. Activate the minutes counter via
the minutes start to flash.
3. Depress
or
is being displayed.
4. Activate the hours counter via
start to flash.
5. Depress
or
is being displayed.
½
When exceeding or undershooting 00:00, the
date will be adjusted automatically.
6. Acknowledge the time adjustment by depressing
the
key for more than 2 seconds. The basic
display will then be shown again.
Comment
If you adjust the time while a chart is inserted, the er-
ror symbol will be shown in the display and the time
will be flashing. The tachograph 1324 will remind
you to update the chart carrier settings;
➥
see page 15.
komp-gbr
or
key until the desired value
, the hours
key until the desired value
1:315
Adjusting the time
= Depress key shortly
= Depress key for a longer interval
.
,
11