Rear Left Housing (Artisan 700/Px700W/Tx700W) - Epson Artisan 700 Service Manual

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
After removing/replacing the Upper Housing, make the specified
A D J U S T M E N T
R E Q U I R E D
adjustments. (See Chapter 5
DISASSEMBLY/ASSEMBLY
"ADJUSTMENT".)
Disassembly/reassembly procedures specific to Artisan 700/PX700W/TX700W

4.3.1.4 Rear Left Housing (Artisan 700/PX700W/TX700W)

The disassembly/reassembly procedures for Artisan 800/PX800FW/
C H E C K
TX800FW differ from those of Artisan 700/PX700W/TX700W, see
P O I N T
4.2.2.6 "Rear Left Housing" (p109)
Parts/Components need to be removed in advance:
Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper Housing
Removal procedure
1. Remove the screws (x2) that secure the Rear Left Housing, and remove the
Rear Left Housing.
Rear Left Housing
Figure 4-216. Removing the Rear Left Housing
When installing the Rear Left Housing, insert the ribs (x2) of the
Rear Left Housing to the inside of the Left Housing. (See
4-216.)
Revision C
for the procedures.
Left Housing
Rib
C.B.A. 3x6 (black) (6±1Kgfcm)
Fig.
190
Confidential