Epson Artisan 700 Service Manual page 187

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
ROUTING THROUGH THE FFC HOLDER
No. FFC/cable name
1 CR Encoder FFC
2 Head FFC (x4)
See Fig. 4-245 for the connector positions on the Main Board.
Insert the CR Encoder FFC and
Head FFC (x4) together to the rib
on the FFC Holder and the hole.
Cover Ink Supply Tube Assy with CR
Encoder FFC and Head FFC (x4), and
secure them to the FFC Holder.
Figure 4-253. Routing to the FFC Holder
DISASSEMBLY/ASSEMBLY
CN No. * Remarks
CN6 ---
CN1,2,3,4 ---
FFC Holder
Rib
Hole
Fold line
Ink Supply Tube Assy
Routing FFC/cables
ROUTING AROUND THE PRINTER MECHANISM
No. FFC/cable name
1 Plunger cable
for the connector positions on the Main Board.
Note * : See Fig. 4-245
Plunger cable:
Route this to the hooks (x10) and
secure it with acetate tape (x1).
Figure 4-254. Plunger Cable
Revision C
CN No. * Remarks
CN19 ---
Acetate tape
Do not tuck
Route this not to let it get
caught between Cartridge Slot
Assy and Cartridge Box.
Hook
(Continued to the next page.)
207
Confidential