Epson Artisan 700 Service Manual page 18

Epson Artisan 700 / Epson Stylus Photo PX700W / TX700W Revision C
1.5 Interface
The following is the specifications of the USB Interface, Network Interface, FAX
Interface (Only Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW), and
Memory Card Slot mounted on this printer.
1.5.1 USB Interface
The table below describes the specifications of the two USB ports; USB device port for
connecting with a host such as a computer, and the USB host port for connecting with
an external devices such as a DSC (digital still camera).
Table 1-13. USB Interface Specifications
Item USB Device port
• Universal Serial Bus
Specifications Revision 2.0
• Universal Serial Bus Device
Class Definition for Printing
Compatible standards
Devices Version 1.1
• Universal Serial Bus Mass
Storage Class Bulk-Only
Transport Revision 1.0
Transfer rate
480 Mbps (High Speed)
Data format
Compatible connector
USB Series B
Max. cable length
Note* : The following devices can be connected to the USB Host port.
• Devices compliant with DPS Version 1.0/1.1 (PictBridge)
• Devices compliant with Universal Serial Bus Mass Storage Class Bulk-Only Transport
Revision 1.0, and the Subclass code is one of the followings.
0x06 (SCSI transparent command set)
0x05 (SFF-8070i command set)
0x02 (SFF-8020i command set)
Table 1-14. Device ID
When IEEE 1284.4 is Enabled
@EJL<SP>ID<CR><LF>
MFG:EPSON;
CMD:ESCPL2,BDC,D4,D4PX,ESCPR1;
MDL:Model Name;
CLS:PRINTER;
DES:EPSON<SP>Model Name;
PRODUCT DESCRIPTION
USB Host port*
• Universal Serial Bus
Specifications Revision 2.0
480 Mbps (Max.)
NRZI
USB Series A
2 [m] or less
When IEEE 1284.4 is Disabled
@EJL<SP>ID<CR><LF>
MFG:EPSON;
CMD:ESCPL2,BDC,ESCPR1;
MDL:Model Name;
CLS:PRINTER;
DES:EPSON<SP>Model Name;
Note : The "Model Name" is replaced as shown in the following table.
Table 1-15. Model Names Indicated in the Device ID
Epson Artisan 800/
Destination
Epson Stylus Photo
PX800FW/TX800FW
North America
Euro Stylus Photo PX800FW
Asia/Pacific Stylus Photo TX800FW
1.5.2 Network Interface
Epson Artisan 700/ Epson Stylus Photo PX700W/TX700W
to the network via Wired r Wireless LAN connection.
(They can not be used simultaneously.)
The following describes each Interface.
Wired LAN
The following interface is equipped for the Wired LAN connection. The
communication mode can be selected from auto setting or fixed setting.
Item
Connector
Communication Speed
Note* : 10Base-T/100Base-TX Ethernet is supported. MDI/MDI-X is selected automatically.
Interface
Model Name
Epson Artisan 700/
Epson Stylus Photo
PX700W/TX700W
Artisan 800 Artisan 700
Stylus Photo PX700W
Stylus Photo TX700W
can be connected
Table 1-16. Wired LAN
Content
RJ-45 receptacle*: 1 port
For either 10Base-T or 100Base-TX, the Full Duplex or Half
Duplex can be selected.
23
Confidential