Adf Motor Unit - Epson Artisan 700 Service Manual

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W

4.2.6.9 ADF Motor Unit

Parts/Components need to be removed in advance:
Scanner Unit/ADF Unit/ADF Cover Assy/ADF Right Cover/ADF Rear Cover/
ADF Cover Stacker/ADF Document Support Cover/ADF Front Cover/ADF
Document Support Assy/ADF Frame Unit
Removal procedure
1. Peel off the acetate tape (x3), and separate the ADF Motor cable, the ADF
Sensor cable and the Grounding Wire.
2. Release the hooks (x4) of the ADF Cable Cover and open the ADF Cable
Cover, then release the ADF Motor cable, the ADF Sensor cable and the
Grounding Wire.
ADF Cable Cover
Acetate tapes (x2)
Grounding Wire
Figure 4-193. Releasing the cables
DISASSEMBLY/ASSEMBLY
Acetate tape
ADF Sensor cable
ADF Motor cable
Hook
When removing the ADF Motor Unit, be careful not to drop the
C A U T I O N
gears (x5) of the ADF Frame Unit and ADF Motor Unit shown
below.
ADF Frame Unit
3. Remove the screws (x2) that secure the ADF Motor Unit.
ADF Motor Unit
Figure 4-195. Removing the ADF Motor Unit (1)
Disassembly Procedures
Do not drop these.
Do not drop these.
Figure 4-194. Handling the ADF Motor Unit
C.B.P. 3x8 (6±1kgfcm)
Revision C
181
Confidential