Lower Paper Guide Waste Ink Pad Assy - Epson Artisan 700 Service Manual

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Align and insert the ribs (x3) of the Waste Ink Tray Assy to the
holes (x3) of the Base Frame, and secure the assy with the hook
(x1) and screw (x1). (See
Waste Ink Tray Assy
Figure 4-158. Installing the Waste Ink Tray Assy
After removing/replacing the Waste Ink Tray Assy, make the
A D J U S T M E N T
R E Q U I R E D
specified adjustments. (See
DISASSEMBLY/ASSEMBLY
Fig. 4-154, Fig. 4-155, Fig. 4-158.)
Rib & hole
Chapter 5 "ADJUSTMENT".)
Disassembly Procedures

4.2.4.21 Lower Paper Guide Waste Ink Pad Assy

Parts/Components need to be removed in advance:
Cassette Unit
Removal procedure
Be careful about ink spilling if the printer is tilted in practical
C A U T I O N
operation.
1. Release the hooks (x2) and remove the Lower Paper Guide Waste Ink Pad
Assy from the opening at the bottom of the Printer.
Bottom side
Lower Paper Guide
Waste Ink Pad Assy
Figure 4-159. Removing the Lower Paper Guide Waste Ink Pad Assy
Align the ribs (x3) of the Lower Paper Guide Waste Ink Pad Assy
with the holes (x3) of the Main Frame, and secure the assy with the
hooks (x2). (See Fig. 4-159.)
After removing/replacing the Lower Paper Guide Waste Ink Pad
A D J U S T M E N T
R E Q U I R E D
Assy, make the specified adjustments. (See
"ADJUSTMENT".)
Revision C
Hook
Rib & hole
Chapter 5
165
Confidential