Epson Artisan 700 Service Manual page 152

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Be careful not to damage the Scanner Carriage FFC since they are
C A U T I O N
secured with double-sided tape (x2).
5. Peel off the Scanner Carriage FFC from the Scanner Lower Housing, and
remove the Scanner Carriage Unit.
Scanner Carriage FFC
Figure 4-170. Removing the Carriage Unit (3)
When attaching the Scanner Cable Cover, route the FFC and
Grounding Wire as shown below.
Artisan 800/PX800FW/
TX800FW
C
A Scanner Carriage FFC
Scanner CR Encoder FFC,
B
Cover Open Sensor FFC
Figure 4-171. Attaching the Scanner Cable Cover
DISASSEMBLY/ASSEMBLY
Scanner Carriage Unit
Rear Artisan 700/PX700W/
side
TX700W
A
A
C
B
Grounding Wire
C
Rib
Groove
After replacing or removing the Scanner Carriage, be sure to
A D J U S T M E N T
R E Q U I R E D
perform the required lubrication. (See
"MAINTENANCE".)
Rear
side
B
Disassembly Procedures
Revision C
Chapter 6
171
Confidential