Epson Artisan 700 Service Manual page 129

Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
3. While holding the right side of the EJ Frame Assy, turn the Spur Gear on the
left side in the direction of the arrow, and move the EJ Frame Assy to the front
side.
EJ Frame Assy
Spur Gear
Figure 4-111. Removing the EJ Frame Assy (1)
4. Pull out and remove the EJ Frame Assy from the EJ Frame Shaft.
Grounding spring
Figure 4-112. Removing the EJ Frame Assy (2)
DISASSEMBLY/ASSEMBLY
Grounding spring
EJ Frame Assy
EJ Frame Shaft
Disassembly Procedures
5. Remove the screw (x1) that secures the EJ Release Frame Assy L and remove
the EJ Release Frame Assy L with the EJ Frame Shaft.
Attach the springs' ends on to the EJ Frame Shaft
EJ Release Frame Assy L
Attach the spring's end on to the EJ Frame Assy
Figure 4-113. Removing the EJ Release Frame Assy L
Revision C
EJ Frame Shaft
Positioning hole & dowel
C.B.S. 3x6 (8±1Kgfcm)
148
Confidential