Software Specifications - SATO /s8408 Operator's Manual

LED INDICATOR STATUS
Link LED (green)
Status LED (orange)
Wireless LED (green)

SOFTWARE SPECIFICATIONS

Corresponding Protocol
Network Layer
Session Layer
Application Layer
NOTE: Print data can be sent by LPR and FTP of TCP/IP and dedicated socket protocol. Printer status is obtainable by ded-
icated socket protocol.
NOTE: In the TCP/IP protocol environment, LPD and FTP are provided for printing; TELNET for variable setup; ARP, RARP,
and BOOTP/DHCP for address setup.
LPD protocol complies with RFC1179 and handles the list of logical printer name as queue name such as lp, sjis, euc. In
addition, a banner page can be printed by a proper setup.
When sending the job by LPR, the transmission order of data file/control file within the job will not affect print operation. In
addition, if the banner page is specified, it will be added to each data file. Job deletion by LPR is not available.
FTP protocol complies with RFC959 and handles the list of logical printer name as a transfer directory. File transfer to this
directory executes print operation. It is possible to specify ASCII(A), Binary(I) and TENEX(L8) as transfer mode - although
the mode difference is dependent on the client. A banner page may be printed with a proper setup.
TELNET Complies with RFC854. This operation consists of interactive menu form and enables change and reference of
internal setup, and to display status. To change the setup, enter "root" user and password at the time of login. Default of root
password is set as null (linefeed only).
S8400 Series Operator Manual
Unit 3: Installation
Network Port Off
Blinking
Front Panel
On
Network Port Off
Front Panel Blinking
Blinking
Front Panel
On
LPD, FTP, TELNET, BOOTP, DHCP
Figure 3-9, Socket Connection Diagram
3-16
Waiting for link
Receiving packet
Infrastructure mode
TCP/IP
ARP, RARP, IP, ICMP
TCP, UDP
---
Linked
---
Ad-hoc mode
PN: 9001160 (C)