Software Specifications - SATO CT4i Series Operator's Manual

Hide thumbs Also See for CT4i Series:

Product manual (32 pages)

Quick manual (2 pages)

Table Of Contents

Table of Contents

Wireless LED (green)

Network Port

Corresponding Protocol

Network Layer

Session Layer

Application Layer

NOTE: Print data can be sent by LPR and FTP of TCP/IP and dedicated socket protocol. Printer status is obtainable by

dedicated socket protocol.

NOTE: In the TCP/IP protocol environment, LPD and FTP are provided for printing; TELNET for variable setup; ARP, RARP,

and BOOTP/DHCP for address setup.

LPD protocol complies with RFC1179 and handles the list of logical printer name as queue name such as lp, sjis, euc. In

addition, a banner page can be printed by a proper setup.

When sending the job by LPR, the transmission order of data file/control file within the job will not affect print operation. In

addition, if the banner page is specified, it will be added to each data file. Job deletion by LPR is not available.

FTP protocol complies with RFC959 and handles the list of logical printer name as a transfer directory. File transfer to this

directory executes print operation. It is possible to specify ASCII(A), Binary(I) and TENEX(L8) as transfer mode - although the

mode difference is dependent on the client. A banner page may be printed with a proper setup.

TELNET Complies with RFC854. This operation consists of interactive menu form and enables change and reference of

internal setup, and to display status. To change the setup, enter "root" user and password at the time of login. Default of root

password is set as null (linefeed only).

CT4i Series Operator Manual

Unit 2: Technical Data

LED INDICATOR STATUS

Front Panel

WIRELESS LAN SIGNAL STRENGTH

Link LED