BMW C1 Repair Manual page 105

When installing:
•
Remove all traces of old thread-locking com-
pound from the threads.
•
Install Woodruff key parallel to crankshaft (arrow),
not parallel to taper.
•
Degrease taper and lightly coat with Loctite 648.
•
Push magnetic wheel with freewheel onto crank-
shaft.
e
Caution:
Make sure that bearing seat of freewheel remains
clear of locking compound.
L
Note:
Turning the freewheel counter-clockwise opens the
freewheel. The magnetic housing cannot be pushed
onto the crankshaft taper unless the freewheel is
opened in this way.
•
Install securing screw with washer: coat threads
of securing screw with Loctite 243.
C1110230
Operating fluids:
Screw.................................................... Loctite 243
Taper .................................................... Loctite 648
X
Tightening torques:
Screw to crankshaft ..................................... 30 Nm
C1110240
11.27