Removing And Installing Magnetic Wheel - BMW C1 Repair Manual

When installing:
•
Make sure that cables are correctly routed.
•
Cable clip must engage centring fixture (arrow) in
cover.
•
Coat threads of self-tapping screws with Loctite
prior to installation (Tapite screws)
•
Note direction of installation for trigger.
Operating fluids:
Securing screw ..................................... Loctite 243
Setting:
Trigger gap................................... "A" 0.8
X
Tightening torques:
Tapite screws................................................. 6 Nm
11.26
# Removing and installing magnetic
wheel
– Remove cover
C1110200
•
Bring crankshaft to TDC.
– Insert pin, BMW No. 11 7 651, to secure crank-
shaft in this position.
....................................................See Group 00
a
L
Note:
Slacken securing screws before removing magnetic
+
/ 0.4 mm wheel if freewheel has to be replaced.
-
•
Remove screw.
11 6 502
•
Use jack screw, BMW No. 11 6 502, to remove
magnetic wheel with freewheel.
•
Check taper and keyway of magnetic wheel.
11 7 651
C1110210
C1110220