Figure A-8 Assigning Hybrid/Loop Keys - NEC SL2100 Programming Manual

Issue 1.0
Once the extension has been selected, click on the Edit Keys tab and assign the
Function Keys. To assign a key choose the feature to assign to a key, then click on
the key to be assigned. In cases where additional options must first be selected, a
menu will be displayed showing the option. The example below shows the options
when assigning Hybrid/Loop keys.
Here you see that Hybrid/Loop key was selected from the function key options, in the
Choice box Both (2) was selected, then line key one was clicked on. At that point line
key one is selected. You can continue to click on subsequent function keys until the
desired Hybrid/Loop keys have been assigned.

Figure A-8 Assigning Hybrid/Loop Keys

SL2100 PC Programming Manual A-9