Ce-04 Ftp Server Account Name Or Authentication Password Input Error; Ce-05 Ftp Server Directory Input Error; Ce-06 Pop3 Server Access Error; Ce-07 Pop3 Server Authentication Check Error - Sharp MX-2300 G Service Manual

CE-04 FTP server account name or authenti-
cation password input error
Trouble content The entered FTP server account name or the
authentication password is invalid.
The entered SMB server log-in name or the password
is invalid.
Section MFP
Case 1 Cause Network cable connection trouble
Check Check to insure that the network cable is securely
and connected.
remedy
Case 2 Cause The FTP server account name registered as the
destination or the password for the account is
incorrect.
Check Check to insure that the FTP server account name
and registered as the destination or the password for the
remedy account is correct.
Case 3 Cause The SMB server account name registered as the
destination or the password for the account is
incorrect.
Check Check to insure that the SMB server account name
and registered as the destination or the password for the
remedy account is correct.

CE-05 FTP server directory input error

Trouble content The entered FTP server directory is invalid.
The entered SMB server folder is invalid.
Section MFP
Case 1 Cause Network cable connection trouble
Check Check to insure that the network cable is securely
and connected.
remedy
Case 2 Cause The FTP server account name registered as the
destination or the password for the account is
incorrect.
Check Check to insure that there exits the FTP server
and directory registered as the destination.
remedy
Case 3 Cause The SMB server account name registered as the
destination or the password for it is incorrect.
Check Check to insure that there exists the SMB server
and folder registered as the destination.
remedy

CE-06 POP3 server access error

Trouble content The specified mail server (POP3) is not found. (POP3
server access error)
Section MFP
Case 1 Cause Network cable connection trouble
Check Check to insure that the network cable is securely
and connected.
remedy
Case 2 Cause Network setup error
Check 1) Check that the connected network supports
and TCP/IP protocol.
remedy 2) Check the Web page to insure that the POP3
server address is correctly set.
3) If the above address is described in Hostname,
check to insure that the DNS server is correctly
set.
Case 3 Cause PO3 server trouble
Check Check the POP3 server for any trouble.
and
remedy
MX-2300/2700 N/G SELF DIAG AND TROUBLE CODE 8 – 9
CE-07 POP3 server authentication check
error
Trouble content The entered POP3 server account name or the
authentication password is invalid. (POP3 server
authentication check error)
Section MFP
Case 1 Cause Network cable connection trouble
Check Check to insure that the network cable is securely
and connected.
remedy
Case 2 Cause The POP3 server account name or the password
registered for the account is incorrect.
Check Check to insure that the POP3 server account name
and or the password for the account is correct.
remedy
CE-08 POP3 server timeout error
Trouble content The specified mail server (POP3) does not respond.
(POP3 server timeout error)
Section MFP
Case 1 Cause Network cable connection trouble
Check Check to insure that the network cable is securely
and connected.
remedy
Case 2 Cause POP3 server trouble
Check Check the POP3 server for any trouble.
and
remedy
E7-00 System memory access error
Trouble content System memory trouble (Tandem memory cannot be
guaranteed.)
Access to system memory cannot be made.
Section MFP
Case 1 Cause Expansion memory instillation error
Check Check installation of the system expansion memory.
and
remedy
Case 2 Cause Garbled data
Check 1) Use SIM60-01 to check memory read/write
and 2) Replace the expansion memory (if installed.)
remedy 3) Replace the MFPcnt PWB.
Case 3 Cause Dirt on the memory pin
Check Clean the memory pin with alcohol.
and
remedy
* When E7-00 is in the following combination where system mem-
ory Slot 2 (inside) and Slot 1 (outside) operate normally but a
hard error occurs. (Combination of system memory (slot 1, slot 2)
System memory Operation guarantee
No.
Slot2 Slot1
(Inside) (Outside)
1 – –
2 256MB –
3 512MB –
4 256MB 256MB
5 512MB 256MB
6 256MB 512MB
7 512MB 512MB
8 – 256MB
9 – 512MB
When turning
on the power
Hard Soft
✕ ✕ Since the
machine is not
booted, the
trouble display is
not made.
Normal operation
Normal operation
Normal operation
Normal operation
Normal operation
Normal operation
Normal operation
Normal operation