Sharp MX-2300 G Service Manual page 191

<Set range and default value of each setup>
Item Display item & Detail of display
A AUTO
B EXPOSURE1
C EXPOSURE2
D EXPOSURE3
E EXPOSURE4
F EXPOSURE5
G AUTO H_TONE
H EXPOSURE1 H_TONE
I EXPOSURE2 H_TONE
J EXPOSURE3 H_TONE
K EXPOSURE4 H_TONE
L EXPOSURE5 H_TONE
M EXE-CUTE MODE
* Items M are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item M after settlement of the values>
When [EXECUTE] button is pressed after changing and settlement
of the exposure adjustment values A to L, the data are saved to
EEPROM and RAM and reflected to item M at the same time.
SIMULATION NO.46-43
TEST
EXPOSURE ADJUSTMENT(FAX : SUPER FINE)
A : 50
; AUTO
A: 50
B : 50 ; EXPOSURE1
[ 1~ 99] C : 50 ; EXPOSURE2
D : 50 ; EXPOSURE3
46-44
Purpose : Adjustment
Function (Purpose) : Used to execute the FAX exposure adjust-
ment (Ultra Fine). (Only when FAX is
installed)
Section : MFP/FAX
Item : Image quality
<Set range and default value of each setup>
Item Display item & Detail of display
A AUTO
B EXPOSURE1
C EXPOSURE2
D EXPOSURE3
E EXPOSURE4
F EXPOSURE5
G AUTO H_TONE
H EXPOSURE1 H_TONE
I EXPOSURE2 H_TONE
J EXPOSURE3 H_TONE
K EXPOSURE4 H_TONE
L EXPOSURE5 H_TONE
Super Fine/Auto
Super Fine/Exposure 1
Super Fine/Exposure 2
Super Fine/Exposure 3
Super Fine/Exposure 4
Super Fine/Exposure 5
Super Fine/Auto/Half tone
Super Fine/Exposure 1/Half tone
Super Fine/Exposure 2/Half tone
Super Fine/Exposure 3/Half tone
Super Fine/Exposure 4/Half tone
Super Fine/Exposure 5/Half tone
AUTO Print mode
EXP1
EXP2
EXP3
EXP4
EXP5
AUTO H_TONE
EXP1 H_TONE
EXP2 H_TONE
EXP3 H_TONE
EXP4 H_TONE
EXP5 H_TONE
0
CLOSE
OK
EXECUTE
Ultra Fine/Auto
Ultra Fine/Exposure 1
Ultra Fine/Exposure 2
Ultra Fine/Exposure 3
Ultra Fine/Exposure 4
Ultra Fine/Exposure 5
Ultra Fine/Auto/Half tone
Ultra Fine/Exposure 1/Half tone
Ultra Fine/Exposure 2/Half tone
Ultra Fine/Exposure 3/Half tone
Ultra Fine/Exposure 4/Half tone
Ultra Fine/Exposure 5/Half tone
MX-2300/2700 N/G SIMULATION 7 – 85
Content
Super Fine/Auto
Super Fine/Exposure 1
Super Fine/Exposure 2
Super Fine/Exposure 3
Super Fine/Exposure 4
Super Fine/Exposure 5
Super Fine/Auto/Half tone
Super Fine/Exposure 1/Half tone
Super Fine/Exposure 2/Half tone
Super Fine/Exposure 3/Half tone
Super Fine/Exposure 4/Half tone
Super Fine/Exposure 5/Half tone
Operation/Procedure
1) Select the set item with [↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [↑], an active display is made and
item is shifted.
If there is no item over [↑], the display grays out and the
operation is invalid.
If there is any item under [↓], an active display is made and
item is shifted.
If there is no item over [↓], the display grays out and the
operation is invalid.
2) Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
3) When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [↑], [↓], [OK] button, [COLOR], or [BLACK] key is
pressed, the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] but-
ton is pressed during printing, the operation is interrupted.
Content
Set range Default value
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 12 1 1 (AUTO)
2
3
4
5
6
7
8
9
10
11
12
Default value Default value
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50