Copy Lead Edge Image Reference Position Adjustment, Image Off-Center, Sub Scanning Direction Image Magnification Ratio Automatic Adjustment; Spf Mode Image Off-Center, Image Lead Edge Position, Sub Scanning Direction Image Magnification Ratio Automatic Adjustment - Sharp MX-2300 G Service Manual

5) Press [EXCUTE] key.
The adjustment pattern is printed out.
6) Set the adjustment pattern on the document table. (Any direc-
tion)
Note: Fit the adjustment pattern correctly with the document
guide.
7) Press [EXCUTE] key.
The following items are automatically adjusted.
* Print image lead edge image position adjustment
* Print image off-center adjustment
8) Press [OK] key.
The adjustment result becomes valid.
Perform procedures 4) to 7) for each paper feed tray.
27-C Copy lead edge image reference position
adjustment, image off-center, sub scanning
direction image magnification ratio auto-
matic adjustment
1) Enter the SIM50-28 mode.
SIMULATION NO.50-28
TEST
AUTO IMAGE POSITION ADJUSTMENT : SERVICE
OC ADJ
SPF ADJ
RESULT
2) Select [OC ADJ] with the key button.
3) Select the paper feed tray with paper in it with the key button.
(Any paper size will do.)
SIMULATION NO.50-28
TEST
AUTO IMAGE POSITION ADJUSTMENT SERVICE
CS1
MFT
4) Press [EXCUTE] key.
The adjustment pattern is printed out.
0
CLOSE
BK-MAG ADJ
SETUP/PRINT ADJ
DATA
1/1
0
CLOSE
CS2
EXECUTE
1/1
MX-2300/2700 N/G ADJUSTMENTS 6 – 62
5) Set the adjustment pattern on the document table. (Any direc-
tion)
Note: Fit the adjustment pattern correctly with the document
guide.
6) Press [EXCUTE] key.
SIMULATION NO.50-28
TEST
AUTO IMAGE POSITION ADJUSTMENT SERVICE
PLEASE SET THE SIT CHART PAPER ON
THEN PRESS [EXECUTE] TO START
REPRINT
The following items are automatically adjusted.
Copy lead edge image reference position adjustment,
image off-center, sub scanning direction image magnifica-
tion ratio automatic adjustment
7) Press [OK] key.
The adjustment result becomes valid.
SIMULATION NO.50-28
TEST
AUTO IMAGE POSITION ADJUSTMENT SERVICE
OC LEAD OFFSET
REPRINT RESCAN
27-D SPF mode image off-center, image lead
edge position, sub scanning direction
image magnification ratio automatic adjust-
ment
Refer to the RSPF (MX-RPX1) SM.
0
CLOSE
THE OC
EXECUTE
0
CLOSE
SUB
RETRY DATA
OK