Basic Operation Flowchart - Sharp MX-2300 G Service Manual

Basic operation flowchart

Standby for entry of SIM
sub code
Enter SIM sub code with
the 10-key.
Press the START button.
If there is no item.
The display is made according
to the selected mode and the item.
START (Copy mode)
Press the Program key.
Press the asterisk (*) key.
Press the clear key.
Press the Program key.
Standby for entry of
SIM code.
Enter the main code of
SIM with the 10-key.
The main code of SIM
is displayed.
Press the START button.
YES
Is there a sub code ?
NO
Select the mode and the
item with the scroll key
and the item key.
YES
Operation check ?
NO
to the selected mode and item.
YES
Operating conditions
check ?
NO
The display is made according to
the selected some and the item.
YES
Data clear ?
NO
Adjustments
YES NO
or setting (counter data
change) ?
Do you
NO
want to change the
content ?
YES
Enter the new setting and
adjustment values.
MX-2300/2700 N/G SIMULATION 7 – 2
Press the SYSTEM
SETTINGS key
YES
<Exclusion type>
You have to exit
simulation mode
before entering into
this mode for self
printing type.
NO
Press the EXECUTE button
and OK button.
Operation is made according
Press the EXECUTE button
and OK button.
Press the EXECUTE button
and OK button.
The selected mode and
the item are cleared.
Operation is made according
to the selected mode and the item.
(Other modes)
Press the EXECUTE button
and OK button.
NO
Is it the same
simulation main
code?
In the power OFF/ON type
simulation, OFF/ON
message is
Press the SYSTEM
displayed by the
SETTINGS key
SYSTEM
SETTINGS key.
YES
Do you want
to perform another
simulation ?
The simulation mode
NO
Do you
YES
want to end the
Press the clear all key.
simulation ?
The changed content
is stored.
is canceled.