Sharp MX-2300 G Service Manual page 172

Item Display
G PHOTOGRAPH
H MAP
I TEXT (COPY TO COPY)
J TEXT/PRINTED PHOTO
(COPY TO COPY)
K PRINTED PHOTO
(COPY TO COPY)
L LIGHT
SIMULATION NO.46 02
TEST
EXPOSURE ADJUSTMENT(B/W)[COPY]
A 50
AUTO1
A:
50
B 50 AUTO2
C 50 TEXT
1 99
D 50 TEXT/PRINTED PHOTO
46-4
Purpose : Adjustment
Function (Purpose) : Used to adjust the exposure of the color
scanner.
Section : Scanner
Item : Adjustment
Operation/Procedure
1) Select the set item with [↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [↑], an active display is made and
item is shifted.
If there is no item over [↑], the display grays out and the
operation is invalid.
If there is any item under [↓], an active display is made and
item is shifted.
If there is no item over [↓], the display grays out and the
operation is invalid.
2) Enter the set value with 10-key.
* Press [C] key to clear the entered values.
* The set values can be collectively changed by pressing [ ]
[ ] buttons.
When the set value is not the upper limit value (lower limit
value), the data of each item is increased (decreased) by 1.
3) When [OK], [↑], [↓], [ ], [ ] button, [COLOR], or [BLACK] key
is pressed, the current entered value is saved to EEPROM and
RAM.
* When [CLOSE] button is pressed, the display is shifted to the
copy basic screen of simulation.
* Copying can be performed also by pressing [COLOR]/[BLACK]
key.
<Set range and default value of each setup>
Item Display
A TEXT
B TEXT/PRINTED PHOTO
C TEXT/PHOTO
D PRINTED PHOTO
E PHOTOGRAPH
F MAP
Set Default
Content
range value
Photograph 1 to 99 50
Map 1 to 99 50
Text (Copy 1 to 99 50
document)
Text/Printed Photo 1 to 99 50
(Copy document)
Printed Photo 1 to 99 50
(Copy document)
Light density 1 to 99 50
document
CLOSE
CLOSE
Set Default
Content
range value
Text 1 to 99 50
Text/Printed 1 to 99 50
Photo
Text/Photo 1 to 99 50
Printed Photo 1 to 99 50
Photograph 1 to 99 50
Map 1 to 99 50
MX-2300/2700 N/G SIMULATION 7 – 66
SIMULATION NO.46 04
TEST
EXPOSURE ADJUSTMENT(COLOR)[ SCANNER]
A:
50
1 99
46-5
Purpose
0
Function (Purpose) : Used to adjust the exposure of the black
Section
Item
Operation/Procedure
1) Select the set item with [↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
OK
played in the setting area.
* If there is any item over [↑], an active display is made and
item is shifted.
If there is no item over [↑], the display grays out and the
operation is invalid.
If there is any item under [↓], an active display is made and
item is shifted.
If there is no item over [↓], the display grays out and the
operation is invalid.
2) Enter the set value with 10-key.
* Press [C] key to clear the entered values.
* The set values can be collectively changed by pressing [ ]
[ ] buttons.
When the set value is not the upper limit value (lower limit
value), the data of each item is increased (decreased) by 1.
3) When [OK], [↑], [↓], [ ], [ ] button, [COLOR], or [BLACK] key
is pressed, the current entered value is saved to EEPROM and
RAM.
* When [CLOSE] button is pressed, the display is shifted to the
copy basic screen of simulation.
* Copying can be performed also by pressing [COLOR]/[BLACK]
key.
<Set range and default value of each setup>
Item Display
A AUTO TEXT
B AUTO TEXT/PRINT
PHOTO
C AUTO TEXT/PHOTO
D TEXT
E TEXT/PRINT PHOTO
F TEXT/PHOTO
G PRINTED PHOTO
H PHOTOGRAPH
I MAP
SIMULATION NO.46 05
TEST
EXPOSURE ADJUSTMENT(B/W)[SCANNER]
A: 50
1 99
A 50
TEXT
B 50 TEXT/PRINTED PHOTO
C 50 TEXT/PHOTO
D 50 PTINTED PHOTO
: Adjustment
scanner.
: Scanner
: Adjustment
Content
Auto text
Auto text/Print Photo
Auto text/Photo
TExt
Text/Print Photo
Text/Photo
Printed Photo
Photograph
Map
A 50
AUTO TEXT
B 50 AUTO TEXT/PRINT PHOTO
C 50 AUTO TEXT/PHOTO
D 50 TEXT
0
CLOSE
CLOSE
OK
Set Default
range value
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
1 to 99 50
0
CLOSE
CLOSE
OK