Sharp MX-2300 G Service Manual page 373

b. Waste toner full detection switch
1) Remove the frame cover. (Refer to Frame Cover in External
Outfit Section.)
2) Remove the connector and the screws, then remove the waste
toner drive unit.
4. Maintenance
✕: Check (Clean, replace, or adjust according to necessity.)
Monochrome
supply,
mechanical
No. Parts name
parts
Color supply
1 Drum (BK) Monochrome
supply
2 Cleaner blade
(BK)
3 Charging unit (BK)
4 Drum (C) Color supply
5 Cleaner, blade (C)
6 Charging unit (C)
7 Side seal F/R (BK) Mechanism
parts
8 Toner reception
seal (BK)
9 Side seal F/R (C)
10 Toner reception
seal (C)
11 Waste toner box
: Clean ▲: Replace
100 200 300 400
K K K K
When
calling
60 120
K K
▲ ▲ ▲ ▲
▲ ▲ ▲ ▲
▲ ▲ ▲ ▲
▲ ▲
▲ ▲
▲ ▲
✕ ✕ ✕ ✕
✕ ✕ ✕ ✕ ✕
✕ ✕
✕ ✕ ✕
✕ ✕ ✕ ✕ ✕
MX-2300/2700 N/G PHOTOCONDUCTOR SECTION i – 6
3) Remove the screw and the spring, and remove the waste toner
box empty lever.
Disengage the connector and the pawl, and remove the waste
toner full detection switch.
: Adjust ✩: Lubricate
500 600 700 800 900 1000
K K K K K
180 240 300
K K
▲ ▲ ▲ ▲ ▲
▲ ▲ ▲ ▲ ▲
▲ ▲ ▲ ▲ ▲
▲ ▲
▲ ▲
▲ ▲
✕ ✕ ✕ ✕ ✕
✕ ✕ ✕ ✕ ✕
✕ ✕
✕ ✕
✕ ✕ ✕ ✕ ✕
: Shif the position.
Remark: Refer to
1100 1200
the Parts Guide.
K K K
Block/Item No.
(Only the
replacement parts
360
are described.)
K K
▲ ▲ ▲
▲ ▲ ▲ (P/G No.: [24]-14)
▲ ▲ ▲
(P/G No.: [24]-2)
▲ ▲
▲ ▲ (P/G No.: [24]-14)
▲ ▲ (P/G No.: [24]-2)
✕ ✕ ✕
✕ ✕ ✕
✕ ✕
✕ ✕
✕ ✕ ✕