Operation Panel - Sharp MX-2300 G Service Manual

E. Operation panel
No. Name
1 Touch panel
2 Mode select key/Lamp
3 Printer lamp (Ready lamp/Data lamp)
4 Numeric key (10-key)
5 [C] key
6 [Job status] key
7 [System setting] key
8 [Logout/Tone] key ([Logout] key for the
models without the FAX function)
9 [Program] key
10 [CA] key
11 [STOP] key
12 [BLACK START] key
13 [COLOR START] key
14 [Power save] key/Lamp
15 [Power] key
16 Main power lamp
1
DOCUMENT
FILING
IMAGE SEND
A message or a key is displayed on the LCD screen. Touch the
displayed key with your finger to perform various operations. When the
displayed key is touched, a sound is generated and the selected item is
highlighted to confirm.
Used to switch the display mode of the touch panel. The lamp of the
selected key is lighted.
• [Document Filing] key
Press this key to switch to the document filing mode in order to store
a document to the hard disk in the form of a image or to print or send
the image stored in the hard disk.
• [FAX/Image send] key ([Image send] key for the models without the
FAX function)
Press this key to switch to the FAX mode/network scanner in order to
use the FAX function or the scanner function.
• Communicating lamp
This lamp is lighted during sending or receiving in the FAX mode, and
lighted during sending in the scanner mode.
• Data lamp
This lamp flashes when FAX data cannot be outputted due to paper
empty, etc. If there is data which has not been sent, the lamp is
lighted.
• [COPY] key
Press this key to switch to the copy mode in order to use the copy
function. When this key is pressed continuously, the total copy
quantity and the toner remaining quantity can be checked.
• Ready lamp
When this lamp is lighted, print data can be received.
• Data lamp
This lamp flashes during reception of print data, and lights up during
printing.
Used to enter the copy quantity or the FAX number, etc.
Used to clear the set value of copy quantity, etc. to "0."
Press this key to display the job status. On the job status screen, the
details of the job can be checked and the job can be terminated.
When this key is pressed, the system setting menu screen is displayed
to allow the paper feed tray setting, destination registration, and other
setting for easy operations of this machine.
Used to logout after user authentication. Used to deliver the tone signal
in the dial line when the FAX function is used.
Used to use the job program when the copy function is used, and to dial
when the FAX function is used.
Press this key to reset the operation, cancel setting, and start from the
initial state.
Used to stop copying and scanning a document.
Used to scan a document in black.
Used to make a color copy in the copy mode and to scan a document in
colors. When the FAX or the internet FAX is used, this key cannot be
used.
Used to set the machine to the auto power shut off mode of power
saving. [Power save] key flashes in the auto power shut off mode.
Turns ON/OFF the power of the machine.
Used in the FAX nighttime mode when the FAX is installed.
This lamp lights up when the main power switch of the machine is ON.
MX-2300/2700 N/G EXTERNAL VIEW AND INTERNAL STRUCTURE 5 – 5
2 3 4
PRINT
READY
DATA
LINE
DATA
COPY
SYSTEM
JOB STATUS SETTINGS
LOGOUT
6 7 8
Function/ Operation
5
9 10 11 12 13
Note
14 15 16