4)
Remove the screws, and remove the angle from HDD.
* Since the HDD is weak in shock, avoid hitting the corner,
dropping, or other shocks.
e. PCU Flash ROM PWB
1)
Remove the screws, and remove the rear cabinet cover.
1
2
2)
Remove the PCU Flash ROM PWB.
1
2
MX-2300/2700 N/G PWB SECTION Q – 3
f. PCU PWB
1)
Remove the rear cabinet.
2)
Remove the PCU Flash ROM PWB.
3)
Remove the connector and the screws, then remove the PCU
PWB.
g. SCAN IN PWB
1)
Remove the rear cabinet.
2)
Remove the connector and the screws, then remove the
SCAN IN PWB.
h. Mother PWB
1)
Remove the rear cabinet.
2)
Remove the SCAN IN PWB.
3)
Remove the connector and the screws, then remove the
mother PWB.
1
2