Sharp MX-2300 G Service Manual page 417

b. Scanner Control PWB
1) Remove the upper cabinet rear cover.
2) Remove the screws, and pull out the scanner control PWB
unit. Then remove the connector.
3) Remove the screws, and remove the scanner control PWB.
c. HL PWB
1) Remove the upper cabinet rear cover.
2) Remove the screws and the connector, and remove the HL
PWB.
d. Driver Sub PWB
1) Remove the upper cabinet rear cover.
2) Remove the screws, and remove the driver sub PWB.
e. Secondary transfer PWB
1) Remove the upper cabinet rear cover.
2) Remove the screws and the connector, and remove the sec-
ondary transfer PWB.
f. Driver Main PWB
1) Remove the rear cabinet.
2) Remove the screws and the connector, and remove the driver
main PWB.
MX-2300/2700 N/G PWB SECTION Q – 5