Table of Contents
Advertisement
AUTOMATIC EXPOSURE ADJUSTMENT
The automatic exposure level can be adjusted to suit your copying needs.
26
Downloaded from:
http://www.usersmanualguide.com/
Press the AUTO/MANUAL/PHOTO (
1
select the PHOTO (
Press and hold down the AUTO/MANUAL/PHOTO (
2
/
) key for approximately 5 seconds.
The PHOTO (
) indicator will go out and the AUTO indicator will
begin to blink.
One or two exposure indicators corresponding to the current auto-
matic exposure level will light up. The factory default setting is level
"3".
Press the light (
3
the automatic exposure level as desired.
Press the AUTO/MANUAL/PHOTO (
4
The AUTO indicator will stop blinking and will light up steadily.
This automatic exposure level will remain in effect until you change
it again by this procedure.
/
) mode.
) or dark (
) key to lighten or darken
/
/
) key to
/
/
) key.
Advertisement
Table of Contents
