Setting The "Ldap Search" Function - imagistics cm3520 User Manual

10

Setting the "LDAP Search" Function

This function is used to select whether or not an LDAP search is allowed in Scan
mode and Box mode.
(The default setting is "Prohibit".)
Reference
For details on the Scan mode and Box mode, refer to the cm3520 Printer
Controller User's Guide.
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, type in the administrator code.
Touch [Enter].
4
Touch [Admin. Set.].
5
Touch [2/4].
6
Touch [LDAP Search].
7
Touch the key for the
desired setting.
8
Touch [Enter].
9
Touch [Exit] in the next
three screens that
appear.
The Basic screen
appears again.
10-46
10.8 Administrator Settings
cm3520