Table of Contents
Advertisement
3.5 Specifying a Zoom Setting
3.5
Specifying a Zoom Setting
The zoom ratio can be set in order to make a copy on paper with a size different
than the document or to enlarge or reduce the size of the document.
The zoom ratio can be specified in any of the following ways.
Automatic Scaling ("Auto Zoom" Setting)
The most appropriate zoom ratio is automatically selected based on the size of the
loaded document and the specified paper size.
Full Size ("×1.0" Setting)
A copy that is the same size as the document (×1.000) is produced.
Enlarging (Enlarge Settings)
Various zoom settings are available for making enlarged copies on standard paper
sizes from standard document sizes.
For example:
A Letter-size document can be enlarged and copied onto 11 × 17-size paper.
A Legal-size document can be enlarged and copied onto 11 × 17-size paper.
Reducing (Reduce Settings)
Various zoom settings are available for making reduced copies on standard paper
sizes from standard document sizes.
For example:
A Legal-size document can be reduced and copied onto Letter-size paper.
A 11 × 17-size document can be reduced and copied onto Letter-size paper.
Minimizing ("Minimal" Setting)
The copy is slightly reduced (×0.930).
Selecting the "Minimal" setting ensures that any part of the original positioned
at the edge of the page will not be cut off in the copy.
The zoom ratio of the "Minimal" setting can be changed to any ratio between
×0.900 and ×0.999.
For details on changing the zoom ratio, refer to Specifying Manual Zoom
Settings.
cm3520
3
3-13
Advertisement
Table of Contents
