Setting The "Access Lock Release" Function - imagistics cm3520 User Manual

10

Setting the "Access Lock Release" Function

This function is used to allow access codes to be entered again after access has
been denied.
Additional Information
If input of the administrator code is denied, turn this machine off, then on again.
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, type in the administrator code.
Touch [Enter].
4
Touch [Admin. Set.].
5
Touch [2/4].
6
Touch [Access Lock
Release].
7
Touch the key for the
access code that you
wish to allow input.
8
Touch [Enter].
To return to the
Admin. Set. screen,
touch [Cancel].
The access lock is
canceled.
9
Touch [Exit] in the next three screens that appear.
The Basic screen appears again.
10-42
10.8 Administrator Settings
cm3520