Setting The "Panel Reset Timer" Function - imagistics cm3520 User Manual

10.8 Administrator Settings

Setting the "Panel Reset Timer" Function

This function is used to specify the length of time after the last operation until all
functions automatically return to their default settings. (The default setting is 1 min.)
Reference
For details, refer to "Turning the Machine On and Off" on page 2-17.
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, type in the administrator code.
Touch [Enter].
4
Touch [Admin. Set.].
5
Touch [4/4].
6
Touch [Panel Reset
Timer].
7
Press the [C] (clear) key.
The currently specified value is erased, and [No] is selected.
cm3520
10
10-61