10.10 Specifying Expert User Mode Functions
6
Compare the width of
the left pages of the
copy sample with the
width of the right pages
to check for the center
of the paper.
7
If the staple position is too far to
the left of the center of the paper,
touch
to specify the
desired positive adjustment
(between +1 mm and +7 mm).
8
If the staple position is too far to
the right of the center of the
paper, touch
desired negative adjustment
(between -1 mm and -7 mm).
9
Touch [Fold Position].
cm3520
to specify the
10
10-87