Stapling (With Finisher 9997 Installed); Stapling (With Finisher 9996 Installed) - imagistics cm3520 User Manual

3

Stapling (with finisher 9997 installed)

The copies are bound together with a staple in the corner.
However, the pages can be stapled only if all of the following conditions are met.
There are between 2 and 30 pages in the document.
If standard-size paper is used, the paper sizes must be
11 × 17 L, Legal L, Letter L, Letter C, Executive L and Executive C.
If non-standard-size paper is used, the paper width must be between 7-1/4 in.
and 11-3/4 in.
If non-standard-size paper is used, the paper length must be between 7-1/4 in.
and 17 in.
Copies are printed only on plain paper.
If the "Mixed Original" function is used, the copies must be produced with paper
of the same width.
This machine must not be set to Interrupt mode.
The "Image Adjustment" function on the Application screen is not used.

Stapling (with finisher 9996 installed)

The copies are bound together with a staple. Either the "1 Staple" or the "2 Staples"
Output setting can be selected.
However, the pages can be stapled only if all of the following conditions are met.
There are between 2 and 50 pages in the document. (However, if the document
size is larger than Legal, the document can contain no more than 25 pages.)
If standard-size paper is used, the paper sizes must be 11 × 17 L, Legal L,
Letter L and Letter C.
If non-standard-size paper is used, the paper width must be between 7-1/4 in.
and 11-3/4 in.
If non-standard-size paper is used, the paper length must be between 7-1/4 in.
and 17 in.
Copies are printed only on plain paper.
If the "Mixed Original" function is used, the copies must be produced with paper
of the same width.
This machine must not be set to Interrupt mode.
The "Image Adjustment" function on the Application screen is not used.
3-10
3.4 Selecting Output Settings
cm3520