Administrator Settings; Setting The "Top Erase" Function - imagistics cm3520 User Manual

10.8 Administrator Settings

10.8 Administrator Settings

Setting the "Top Erase" Function

This function is used to set the amount of loss at the edge of the original. The
specified amount is erased during printing. (The default setting is "5 mm".)
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, type in the administrator code.
Touch [Enter].
4
Touch [Admin. Set.].
5
Touch [Top Erase].
6
Touch the key for the
desired setting.
7
Touch [Enter].
8
Touch [Exit] in the next
three screens that
appear.
The Basic screen
appears again.
cm3520
10
10-33