10.10 Specifying Expert User Mode Functions
9
If the lines are shifted as shown
at the right, touch
specify the desired positive
adjustment for "X" (between +1
dot and +6 dots).
10
If the lines are shifted as shown
at the right, touch [Y], and then
touch
to specify the
desired negative adjustment for
"Y" (between -1 dot and -6 dots).
11
If the lines are shifted as shown
at the right, touch [Y], and then
touch
to specify the
desired positive adjustment for
"Y" (between +1 dot and +6
dots).
12
Press the [Start] key.
The adjusted test pattern is printed on 11 × 17-size paper.
cm3520
to
10
10-75