Table of Contents
Advertisement
2
Reference
For details on the default settings, refer to "Default Settings" on page 2-21.
The time until the panel reset timer operation is performed, and whether or not
it is performed can be set from Administrator mode. For details, refer to "Setting
the "Panel Reset Timer" Function" on page 10-61.
Whether or not the panel reset timer operation is performed when there is a
change of users can be set with one of the User's Choice: 1 functions.
For details, refer to "Setting the "Account Change Auto Reset" Function" on
page 10-15.
Power Save Mode
If no operation is performed for the specified length of time or if the [Power Save]
key is pressed, the touch panel goes off and the machine enters a mode where it
conserves power.
This is the Power Save mode.
The machine can receive jobs even while it is in Power Save mode.
As the factory default, the machine enters Power Save mode after 15 minutes.
Additional Information
The machine may enter Sleep mode from Power Save mode.
As the factory default, the machine enters Power Save mode if no operation is
performed for 15 minutes, and then the machine enters Sleep mode after 30
minutes have elapsed.
Reference
The length of time after the last operation until the machine enters Power Save
mode can be specified using the "Power Save" function on the User's Choice:
1 screen. For details, refer to "Setting the "Power Save" Function" on
page 10-11.
2-18
2.3 Turning the Machine On and Off
cm3520
Advertisement
Table of Contents
