Setting The "Over Size Paper Selection" Function - imagistics cm3520 User Manual

10.8 Administrator Settings
6
Touch the key for the
desired setting.
7
Touch [Enter].
8
Touch [Exit] in the next
three screens that
appear.
The Basic screen
appears again.

Setting the "Over Size Paper Selection" Function

This function is used to set the paper size for over size paper. (The default setting
is "12 × 18".)
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, type in the administrator code.
Touch [Enter].
4
Touch [Admin. Set.].
5
Touch [Over Size
Paper Selection].
cm3520
10
10-35